Delrin AF
Delrin AF
Delrin AF offers a higher limiting PV and has a lower coefficient of friction. This is due to the additional PTFE content. PTFE is fluorocarbon fibres uniformly dispersed in Delrin acetal resin. The addition of PTFE helps (typically) decrease the wear capability and impact strength. Delrin AF is available in different blends, from 12% upwards to full-strength 20%.
Most use scenarios are applications with bearings, bushings, cams and other antifriction devices that require toughness. Delrin AF presents a higher initial cost, however, the cost savings due to the elimination of costly lubricants and continuous maintenance make Delrin AF a budget effective choice.
Long-Term Cost Savings
Extra Resilient
Able to withstand high loads and offers fantastic wear characteristics to ensure the longevity of your application.
Easy To Machine
Multi-use applications are made easy with Delrin AF capability to be machined into your specific goals.
- Low moisture absorption
- High strength and stiffness
- Easy to machine
- Superior load-bearing characteristics
- Bearings and Bushings
- Electrical Components
- Structural Keels
- Gears and Rollers
Acetal | Wear Factor “k” (1) | Comparative Wear Rate | Coefficient of Friction Static (2) | Coefficient of Friction Dynamic (3) | Limiting PV (4) |
Delrin AF Blend | 57 | 1.2 | .18-.19 | .19-.20 | 8,300 |
Delrin AF | 65 | 1.4 | .18-.19 | .19-.20 | 11,000 |
- Low moisture absorption
- High strength and stiffness
- Easy to machine
- Superior load-bearing characteristics
- Bearings and Bushings
- Electrical Components
- Structural Keels
- Gears and Rollers
Acetal | Wear Factor “k” (1) | Comparative Wear Rate | Coefficient of Friction Static (2) | Coefficient of Friction Dynamic (3) | Limiting PV (4) |
Delrin AF Blend | 57 | 1.2 | .18-.19 | .19-.20 | 8,300 |
Delrin AF | 65 | 1.4 | .18-.19 | .19-.20 | 11,000 |
Contact Us
Hours:
Monday – Friday 8:00 a.m. – 5:00 p.m.